Top 10 🎁 Automotive Repair Flashlights LEDLenser P5R Work Rechargeable Flashlight | Adjustable Focus ✔️

Description

What’s included: LEDLenser P5R Work flashlight, rechargeable battery, charging station bracket, magnetic charge cord with AC-wall adapter, nylon belt holster, intelligent belt clip and wrist lanyard

Features of LEDLenser P5R Work Rechargeable Flashlight:
• primary front facing neutral white LED plus auxiliary side facing cool white LED
• rubber covers on the bezel and tail for enhanced impact resistance
• protective lens shield
• chemical resistant
• flicker free light
• aluminum body
• waterproof to IP68 standard (not dive rated)
• natural light output (CRI 90) with 4 brightness levels
    ☼ High – 320 lumens, 1 hour, 165m range
    ☼ Medium – 120 lumens, 3 hours, 100m range
    ☼ Low – 15 lumens, 25 hours, 30m range
    ☼ Boost – 480 lumens, after 10 seconds light returns to previous setting
• maximum beam range of 787 feet (240 meters)
• Advanced Focus System™
    ▹ twist front bezel to adjust focus
• powered by a lithium ion rechargeable battery, included
• magnetic charging system
    ▹ attach included charging cord to side of flashlight for charging
    ▹ or attach cord to included bracket, then slide light into bracket
    ▹ charging indicator on switch changes from red to green when charging is complete
• mid body switch* (can be reprogrammed to customize switching – below is the factory default)
    ▹ press for high
    ▹ press again to change brightness level
    ▹ after 3 seconds at any level, the next press turns the light off
    ▹ for Boost, double press (light returns to previous level after 10 seconds)
• battery status indicator on switch
    ▹ switch glows for 3 seconds when light is switched on
    ▹ green – high to medium power remaining
    ▹ orange – medium to low power remaining
    ▹ red – low power remaining
• transportation lock prevents switch activation
    ▹ from off, press and hold switch for 5 seconds
    ▹ light will blink 4x to signify locked status
    ▹ repeat to unlock

*Note: The P5R Work ships in factory default setting. To return light to default switch setting:
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. then hold switch again until red LED on switch blinks 4x
5. release switch
To add memory mode (turns on in last brightness level used)
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. press and release switch once