Description
Whatโs included: LED Lenser P7R Work flashlight, rechargeable battery, charging station bracket, magnetic charge cord with AC-wall adapter, nylon belt holster, belt clip and wrist lanyard
Features of LEDLenser P7R Work Rechargeable Flashlight:
โข primary natural white output plus auxiliary side facing cool white LED
โข rubber covers on the bezel and tail for enhanced impact resistance
โข protective lens shield
โข chemical resistant
โข flicker free light
โข aluminum body
โข waterproof to IP68 standard (not dive rated)
โข natural light output (CRI 90) with 4 brightness levels
ย ย ย โผ High โ 900 lumens, 2 hours, 180m range
ย ย ย โผ Medium โ 390 lumens, 3.25 hours, 115m range
ย ย ย โผ Low โ 15 lumens, 60 hours, 15m range
ย ย ย โผ Boost โ 1200 lumens, 240m range (10 seconds at max brightness)
โข maximum beam range of 787 feet (240 meters)
โข Advanced Focus Systemโข
ย ย ย โน adjustable focusing (twist front bezel)
โข powered by a lithium ion rechargeable battery, included
โข magnetic charging system
ย ย ย โน attach included charging cord to side of flashlight for charging
ย ย ย โน or attach cord to included bracket, then slide light into bracket
ย ย ย โน charging indicator on switch changes from red to green when charging is complete
โข mid body switch* (can be reprogrammed to customize switching โ below is the factory default)
ย ย ย โน press for high
ย ย ย โน press again to change brightness level
ย ย ย โน after 3 seconds at any level, the next press turns the light off
ย ย ย โน for Boost, double press (light returns to previous level after 10 seconds)
โข battery status indicator on switch
ย ย ย โน switch glows for 3 seconds when light is switched on
ย ย ย โน green โ high to medium power remaining
ย ย ย โน orange โ medium to low power remaining
ย ย ย โน red โ low power remaining
โข transportation lock prevents switch activation
ย ย ย โน from off, press and hold switch for 5 seconds
ย ย ย โน light will blink 4x to signify locked status
ย ย ย โน repeat to unlock
*Note: The P7R Work ships in factory default setting. To return light to default switch setting:
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. then hold switch again until red LED on switch blinks 4x
5. release switch
To add memory mode (turns on in last brightness level used)
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. press and release switch once























Reviews
There are no reviews yet.