Description
Whatโs included: LED Lenser P18R Signature flashlight, rechargeable battery pack, magnetic charge cable, AC-wall plug charging adapter and wrist lanyard
Features of LEDLenser P18R Signature Rechargeable Flashlight:
โข flicker free light
โข aluminum body
โข water resistant to IP54 standard
โข cool white LEDs with 4 brightness levels
ย ย ย โผ High โ 2600 lumens, 2.5 hours, 420m range
ย ย ย โผ Medium โ 1000 lumens, 4.5 hours, 260m range
ย ย ย โผ Low โ 30 lumens, 70 hours, 50m range
ย ย ย โผ Boost โ 4500 lumens, 720m range (10 seconds at max brightness)
โข maximum beam range of 2,362 feet (720 meters)
โข Advanced Focus Systemโข
ย ย ย โน adjustable focusing (push or pull front bezel)
โข powered by a lithium ion rechargeable battery pack, included
โข magnetic charging system
ย ย ย โน attach included charging cable to side of flashlight for charging
ย ย ย โน charging indicator on switch changes from red to green when charging is complete
โข mid body switch* (can be reprogrammed to customize switching โ below is the factory default)
ย ย ย โน press for high
ย ย ย โน press again to change brightness level
ย ย ย โน after 3 seconds at any level, the next press turns the light off
ย ย ย โน for Boost, double press (light returns to previous level after 10 seconds)
โข battery status indicator on switch
ย ย ย โน switch glows for 3 seconds when light is switched on
ย ย ย โน green โ high to medium power remaining
ย ย ย โน orange โ medium to low power remaining
ย ย ย โน red โ low power remaining
โข transportation lock prevents switch activation
ย ย ย โน from off, press and hold switch for 5 seconds
ย ย ย โน light will blink 4x to signify locked status
ย ย ย โน repeat to unlock
*Note: The P18R Signature ships in factory default setting. To return light to default switch setting:
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. then hold switch again until red LED on switch blinks 4x
5. release switch
To add memory mode (turns on in last brightness level used)
1. switch light on
2. hold switch, red LED on switch blinks once then blinks twice
3. release switch
4. press and release switch once























Reviews
There are no reviews yet.