Top 10 🛒 Fire Nightstick Helmet-Mounted Dual-Light With Spot And Flood Lighting, NSP-4650B ✨

Description

The Nightstick NSP-4650B is a helmet mounted dual light – flashlight + floodlight. This Nightstick helmet light fits most fire helmets and hard hats and can be mounted to the brim on either side. The NSP-4650B has a primary front-facing LED that provides a focused beam with up to 220 lumens in high. This Nightstick helmet light has a secondary white flood LED angled at 45 degrees that lights up the area in from and below. In addition, the Nightstick NSP-4650B has a rear facing green LED for visibility from behind.

What’s included: Nightstick Helmet-Mounted Multi-Function Dual-Light NSP-4650B, 2 mounting screws, Allen wrench and batteries

Features of Nightstick Helmet-Mounted Multi-Function Dual-Light NSP-4650B:
• Dual-Light technology provides a focused beam plus area lighting
• fits most fire helmets and hard hats
• can be mounted to the brim on either side of most helmets
• angle can be adjusted for optimum light and clearance of face shields, goggles & other equipment
• flashlight mode – primary front facing white LED provides a focused beam
     High – 220 lumens, 3.5 hour runtime, 183 meter range
     Medium – 100 lumens, 10 hour runtime, 120 meter range
     Low – 30 lumens, 33.5 hour runtime, 59 meter range
     Strobe
• floodlight mode – secondary white flood LED provides area light
     High – 100 lumens, 10 hour runtime
     Medium – 50 lumens, 21.5 hour runtime
     Low – 15 lumens, 60 hour runtime
• dual-light mode – flashlight + floodlight
     175 lumens, 4.5 hour runtime
• rear facing green Safety LED provides visibility from behind
• maximum beam range of 600 feet (183 meters)
• waterproof to IPX7 standard (not dive rated)
• dual push button switches
     press front switch for flashlight mode in high
     press front switch again for off
     press and hold front switch to change brightness level
     press front switch twice rapidly for strobe
     press rear switch for floodlight mode
     press rear switch again for off
     press and hold rear switch to change brightness level
     press both switches for dual light
• powered by two CR123 lithium batteries (included)
• impact and chemical resistant
• aluminum construction
• meets requirements for NFPA-1971-8.6 (2013)
• measures 3.23″ long x 1.14″ head diameter x 1.42″ wide
• weighs 6.5 ounces with batteries
• limited 1 year warranty through Bayco Products
• designed in the USA, manufactured in China